Timer The timer starts only when the set temperature is reached. Ventilation All models in this series are equipped with a ventilator fan that can be regulated at 4 different speeds. In addition, all drying ovens, sterilizers TS 8000 are equipped with an extra thermostat that cuts the power to the heater if the temperature should rise above the maximum working temperature of the cabinet. All cabinets are equipped with a separate electronic safety thermostat, class 3.1, that takes over the temperature control in the case of a controller failure. Safety All models are designed to satisfy the requirements of the international standard IEC 1010-1. Alarm limits can be set both below and above the set temperature. Alarm The controller is equipped with both flashing and acoustic alarm. Calibration Digital calibration of temperature is easily operated by entering new constants from the keyboard into the microprocessor.

The controller has passed the tests for the highest class of EMC requirement for the heavy industry (EN 50081-1 and EN 50082-1), tested by NEMCO EMC-Iab. It has a number of functions, such as adjustable alarm limits, acoustic alarm, data logging, timer, 4 fan speeds and PID control of the temperature. (Typically sterilization) TEMPERATURE CONTROLLER The controller is very easy to operate and has a large, green display. KEY FEATURES ∫ Temperature range up to 250 ˚C ∫ PID Temperature controller ∫ Digital calibration ∫ Alarm ∫ Timer ∫ Datalogging ∫ Safety thermostat ∫ 4 speed fan ACCESSORIES 2-Layer glass window Internal lamp w/switch TS 8024 TS 8056 TS 8136 TS 8265 TS 8430 – ¸ ¸ ¸ ¸ ¸ ¸ ¸ ¸ ¸ Rack, socket 50 cm high – ¸ ¸ – – Socket w/material cabinet – – – ¸ ¸ Set of castors – – – ¸ ¸ Door lock ¸ ¸ ¸ ¸ ¸ Wall bracket ¸ ¸ ¸ – – Access port 30 mm ¸ ¸ ¸ ¸ ¸ – Not available sterilizers, LABORATORY DRYING OVENS TS 8000 (Basic) The basic TS 8000 is recommended when operating with the same temperature throughout the whole process, and when a written report is not needed. The two biggest models stand on the floor and have adjustable feet. The three smallest models are table models that are stackable.

Externally, the cabinets are constructed of electrolytically galvanized steel sheets, coated with a grey epoxy polyester paint (RAL 7035). Interior housing and shelves are in stainless steel. The Basic (see page 5) and the Special (see page 6). There are two different types of controllers available. TS8024 TS8056 TS8136 TS8265 TS8430 TS 8000 Series: sterilizers, laboratory drying ovens Series TS 8000 consists of five different cabinets with sizes from 24 litres up to 430 litres.

Cabrillo file creator free